Tube filling and sealing machine operation flow

The tube in tube filling and sealing machine is a machine for automatically filling and sealing the tube in the tube. It can be widely used in cosmetics, drugs, food and other industries. The following will introduce the operation process of the pipe filling and sealing machine in detail.

1. Installation preparation

Before operating the tube filling and sealing machine in the tube, it is first necessary to prepare the installation. Place the machine on a flat and stable ground, and fasten the machine firmly by bolts. The power supply of the machine should be matched with the power supply of the work site. At the same time, it is necessary to check whether the various parts of the machine are installed correctly, operate flexibly, and whether the tools are installed firmly.

2. Prepare products and packaging materials

Before the operation of the pipe-in-tube filling and sealing machine, the pipe-in-tube products to be filled and sealed and the corresponding packaging materials need to be prepared. Ensure that the quality of products and packaging materials meet the requirements, and adjust the parameters of the machine according to the size of the products and packaging materials to ensure that the normal filling and sealing.

3. Load products and packaging materials

Place the product to be filled into the feeding device of the machine, and adjust the position and fixture of the feeding device to ensure that the product can accurately enter the filling and sealing position. Place the packaging material to be used on the packaging material rack of the machine, and adjust the position and tension of the packaging material rack to ensure that the packaging material can be stretched and sealed properly.

4. Set the machine parameters

Set machine parameters according to product and packaging material requirements. Including filling amount, sealing temperature, sealing time and so on. According to different products and packaging materials, adjust the corresponding parameters to ensure that the appropriate filling volume and sealing effect can be achieved.

5. Start the operation

After confirming that the parameters of the machine have been set, press the start button and the machine will start to work automatically. In the process of automatic filling and sealing of the machine, the operator needs to monitor the running status of the machine to ensure that the machine can work normally and deal with abnormal situations in a timely manner.

6. Monitor and adjust

During the operation of the machine, the operator needs to continuously monitor the working state of the machine, especially the effect of product filling and sealing. If it is found that the filling amount is not accurate, the sealing effect is not ideal, etc., it is necessary to adjust the parameters of the machine in time, and maintain the machine.

7. Perform safe operations

In the operation pipe filling and sealing machine, the operator needs to maintain safety awareness at all times and follow the relevant safety operation procedures. During the operation of the machine, do not put hands or other objects near the moving parts to prevent accidents. At the same time, timely clean up the debris around the machine and the waste generated by filling to ensure the cleanliness and safety of the work site.

8. Shutdown and maintenance

After completing the filling and sealing tasks, press the stop button and the machine will stop running. At this time, the operator needs to clean, maintain and maintain the machine. Clean the filling pipe, replace the sealing tool, lubricate the machine parts, etc., to ensure the stable operation of the machine for a long time. At the same time, regular inspection and maintenance of the machine, and timely treatment of machine failures or abnormal situations.

The above is the operation process of the tube filling and sealing machine. Through reasonable operation and maintenance, it can ensure the normal work of the machine and the quality of the product. In actual operation, the corresponding adjustment and treatment should also be made according to the specific model of the machine and the requirements of the product.